|
|
 |
You perform regular maintenance on your car to prevent expensive repairs down the road, why not do the same for your electronics? Bonitron offers maintenance solutions that allow you to test and form capacitor banks. Test your capacitors to see when they are approaching their "end of life" and replace them before an unnecessary and expensive failure occurs. If you have capacitors that have been stored for awhile, reform them with our M3628PCF Portable Capacitor Former to avoid damage to your drive at startup. A great benefit of many of Bonitron's Maintenance Solutions is portability, making testing and maintenance more convenient! |
|
|
|
 |
M3628PD Portable Discharge Controller |
|
The M3628PD Portable Discharger depletes energy stored in ultra capacitor banks. The unit can be self-powered from the capacitor bus or from the supplied 115VAC line cord. The M3628PD includes an IGBT switch and resistor element, with 16’ leads to the capacitor bus and an 18’ power cord. The unit is equipped with fans for cooling the resistor element and is capable of a full discharge cycle every 15 minutes. A voltmeter displays the DC voltage and capacitor bank discharging status, which combined with a fused positive DC link, increases safety for cabinet maintenance. |
 |
M3628PCF Portable Capacitor Former |
The M3628PCF is designed for maintenance of stored capacitors or as a benchtop power supply. Drive manufacturers require the bus capacitors in drives stored for more than a year to be reformed before installation to avoid damage at start-up. The M3628PCF is perfect for preparing drives for deployment. It can also be used for any low power, high voltage DC testing. The integrated discharge controller brings the capacitors to a safe voltage level for transport, maintenance, or storage. |
- Used to form capacitors or as a benchtop power supply
|
 |
M3628PCT Portable Capacitor Tester |
As capacitors age, their ESR rises and capacitance drops significantly below the original specification. These capacitors typically need replacement to avoid process failure. Measuring the capacitance and ESR helps determine when these capacitors reach EOL (end of life), avoiding both system failure and expensive, unnecessary preemptive replacement. The Bonitron M3628PUT and M3628PCT Modules allow the user to charge a capacitor or bank to a specified voltage, and then discharge the bank. The display will then show the calculated capacitance of the bank. The units also perform automated capacitor forming profiles, allowing capacitor banks to be brought out of long-term storage and into service. |
- Electrolytic Capacitors
- Up to 800VDC
|
 |
M3628PUT Ultracapacitor Tester |
- Up to 500 Farads
- Measures ESR
|
 |
|
|