M3484

Industrial Line Noise Filter


M3484 Line Noise Filter

The M3484 line filter is designed to be used in applications where power electronic devices experience problems from line harmonics, capacitor switching transients and DC drive notching. Typically, devices with these problems have overvoltage faults. The problems are more severe when the devices are in a standby or lightly loaded mode. For this reason, chokes alone are unable to filter the transients.

The filters require some impedance (at least 5%) between the noise source and their point of installation for proper filtering. Usually, existing AC chokes or system transformers provide this impedance

RoHS Compliant

Features

  • Simple Wiring
  • Side Mount Fan
  • TYPE-12 & TYPE-3R chassis available

Advantages

  • Filters without shifting the resonant frequency of the electrical system
  • Provides additional system kVAR for power factor correction and KVA demand reduction

Benefits

  • Minimizes downtime due to drive trips from harmonic reductions
  • Protects sensitive equipment
  • Single Module solution
Model Number Input Volts Power Dissipation Branch Capacitance KVAR at 60Hz Fuse Amps Enclosure Type
M3484D3-L06C50-J21 230 VAC 600 W 50 µF 3 kvar 30 A NEMA 12
M3484D3-L06C50-F16 230 VAC 600 W 50 µF 3 kvar 30 A NEMA 3R
M3484D3-L06C50-J21 230 VAC 1200 W 50 µF 3 kvar 40 A NEMA 12
M3484D3-L12C50-F16 230 VAC 1200 W 50 µF 3 kvar 40 A NEMA 3R
M3484D3-H06C50-J21 460 VAC 600 W 50 µF 12 kvar 30 A NEMA 12
M3484D3-H06C50-F16 460 VAC 600 W 50 µF 12 kvar 30 A NEMA 3R
M3484D3-H12C50-J21 460 VAC 1200 W 50 µF 12 kvar 40 A NEMA 12
M3484D3-H12C50-F16 460 VAC 1200 W 50 µF 12 kvar 40 A NEMA 3R
Back to Top